M-Spa Alpine User Manual

CE 001 B090 Alpine B-121/B-141 Castello B-130 Camaro B-131 B-1

Function Failure Alarm on the Control Panel When power pack doesn’t work properly, there will be FILTER FAILURE (A) HEATER FAILURE correspond

Special Notice on Water Treatment Please read about water quality and filter in user manual. Always shower before you enter your MSpa! Please use t

2. Consumers should keep the screws and other small parts during dismantling the filter pump. Any damage or missing parts caused by improper operatio

13

MSpa® products are designed with reliability and simplicity in mind. In addition, our internal Qual- ity Assurance Team carefully inspects ea

Damages caused by or attributable to the following incidents are specially excluded: a. Any damage caused by the operation of the spa with water tem

16

IMPORTANT SAFETY INSTRUCTIONS ! WARNING For your own safety and that of your equipment, make sure to take the following precautions. Failure to fol

WARNING: Children should be supervised to ensure that they do not play with the appliance. WARNING: To reduce the risk of injury, DO NOT permit chi

CONSULT YOUR PHYSICIAN FOR RECOMMENDATIONS CAUTION: The spa should not be setup or left out in temperature lower than 4°C if the heater is not oper

INSTRUCTIONS NOTE: Ensure to check all parts are present. A: Aluminium foil top lid and zipper 1pc B: Control panel C: Spa pool D: Temp barrier m

B. RCD Test WARNING: RISK OF ELECTRIC SHOCK. The RCD plug must be tested before each use. WARNING: Insert the RCD plug into a

c) Connect the pin plugs. Make sure that plugs are properly matched together, screw a cap, and then you’ ll see yellow light on c

i) Connect the inflation hose to the air valve of inflatable bladder(optional) and then press the “bubble” but- ton on the control panel to inflat

POWER PACK OPERATION Warning: to avoid function failure and damage, please do not operate until spa is filled with water to the minimum water mar